Styrorail’s SR.P products are versatile expanded polystyrene insulation panels used to insulate all surfaces from the foundation to the roof. Insulate the interior or exterior surface of foundation walls, the interior or exterior of framed walls as well as underneath the basement and garage concrete slabs.
Versatile Insulation Panel – Expanded polystyrene insulation panel with integrated furring strips at 406 mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.
SR.I 200 1.5″ x 48″ x 96″ Flush
Expanded polystyrene insulation panel with integrated furring strips at 406mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.
Direct fixation of horizontal furring strips, vapor barrier and interior finish.
Perfect overlap between panels through shiplap joints on two sides.
SR.I 200 2.5″ x 48″ x 96″ Flush
Expanded polystyrene insulation panel with integrated furring strips at 406mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.
Direct fixation of horizontal furring strips, vapor barrier and interior finish.
Perfect overlap between panels through shiplap joints on two sides.
SR.P 200 R10 4′ x 8′
SR.P200 Type II Rigid Insulation. 16 PSI @ 10% Deflection 2.5″ x 48″ x 96″ R10
The SR.P200™ panels manufactured by Styro Rail Inc. are composed of type 2 expanded polystyrene [EPS] rigid insulation.
SilverClad R5
Non vapour barrier insulating panel for framed walls.
Type 1 Expanded polystyrene insulation panel equipped with a microperforated reflective metallized film on both sides to insulate the outer surface of framed walls.
Allows moisture contained in the wall to escape. Eliminates thermal bridges. Second plane of protection against adverse weather conditions.
SR.I 200 1.5″ x 48″ x 96″ Crowned
with Integrated Furring Strips Type II EPS 16 PSI R6
The SR.I™ panels manufactured by Styro Rail Inc. are composed of type 1 [100 series] or type 2 [200 series] expanded polystyrene [EPS] rigid insulation in which 25 mm x 76 mm [1” x 3”] furring strips are embedded at every 406 mm [16”] o.c. or at every 610 mm [24”] o.c.
SR.P 300 – Type 3 Insulating Panel
The SR.P300™ panels manufactured by Styro Rail Inc. are composed of type 3 expanded polystyrene [EPS] rigid insulation and offers a compressive strength of 140 kPa [20 PSI].
Insulating value of RSI 0.74/25 mm
Meets current building code requirements
Closed cell- moisture resistant
Non vapour barrier
Permanent r-value
ACCESSORIES:
Acoustic Sealant for Polyethylene Vapour Barriers (850 ml tubes)
Blue Sheathing Tape for PE Vapour Barrier
Polyethylene Vapour Barriers (6 mil – 8’, 9’ or 10’ x 1500 sq. ft. rolls)
The RGS Team are “Subject Matter Experts” in High Performance Building Products & Systems for Residential, Multi Unit Residential & Commercial structures.
In-house expertise to ensure that you always have the right material for the right application at the right price, foundation to roofline.
Provide our customers with the materials and expertise to design and build Better Buildings. Buildings that are sustainably built with products that are recyclable, sourced locally and contribute significantly to reduced energy costs and the lowering of our Carbon Footprint.
We are your “Net Zero” ally, committed to using our technical expertise to investigate the products we offer so that you don’t have to:
• Embodied Carbon Content
• Environmental Product Declaration
• Global Warming Potential
• Life Cycle Assessments
To provide high performance products with the in-house expertise to ensure that you always have the right material for the right application, foundation to roofline, cradle to grave. Products designed to reduce the environmental/carbon footprint to ensure a sustainable future.
To educate and communicate the environmental performance and impact of these materials over their lifetime we will work with our vendors to ensure the products we represent meet these criteria, with the building science to back it up.
