Ceilings

CertainTeed fiberglass batt & roll insulation are easy to install and useful for controlling temperatures, acoustics, and lowering energy costs. It is proven fiberglass technology made with renewable, recycled, and plant based ingredients, with no added formaldehyde, harsh acrylics, dyes or unnecessary fire retardant chemicals.

Sustainable Insulation: R-Value R8 – R40
Width 14.75″ or 24″          |           Thickness 2.75″ – 12.0″

Johns Manville Sound & Fire Block® mineral wool batts are noncombustible and moisture-resistant. The high-density fibers in mineral wool help delay the spread of fire and reduce noise transfer in interior walls and between ceilings and floors

JM Sound & Fire Block Mineral Wool Insulation:
Width 16.0”           |          Thickness 3.0”

JM Formaldehyde-free™ thermal and acoustical insulation for wood, engineered wood and steel framing is made of long, resilient glass fibres bonded with a thermosetting resin. A wide range of thermal resistance is available to provide thermal control for both vertical and horizontal applications.

JM Sound-SHIELD Insulation:
Width 15.0” or 16.0”          |          Thickness 1.5” – 6.0”

Unfaced Fibreglass Insulation: R8 – R50
Width 11.25” – 24.0”           |           Thickness 2.5” – 13.25”

Knauf quality engineered thermal and acoustical fiberglass batt insulation with innovative ECOSE® technology is ideal for floors, walls, ceilings and attics.

ECOBATT® Insulation: R-Value R8 – R49
Width 11″ – 24″           |           Thickness 2.5″ – 13.75

Styrorail’s SR.P products are versatile expanded polystyrene insulation panels used to insulate all surfaces from the foundation to the roof. Insulate the interior or exterior surface of foundation walls, the interior or exterior of framed walls as well as underneath the basement and garage concrete slabs.

Versatile Insulation Panel
Expanded polystyrene insulation panel with integrated furring strips at 406 mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.

SR.P200 (Type 2):  R4.0 per inch
16 PSI            |           2’x8’ or 4’x8’

SR.P300 (Type 3): R4.2 per inch
20 PSI           |           2’x8’ or 4’x8’

SR.P350 (Type 3): ’R4.3 per inch
30 PSI           |           2’x8’ or 4’x8

SR.I 100 (Type 1):  R3.7 per inch
10 PSI            |           4’x8’

  * with embedded furring strips

SR.I 200 (Type 2):  R4.0 per inch
16 PSI            |           4’x8’

  * with embedded furring strips

Accessories:

  • Acoustic Sealant for Polyethylene Vapour Barriers (850 ml tubes)

  • Blue Sheathing Tape for PE Vapour Barrier

  • Polyethylene Vapour Barriers (6 mil – 8’, 9’ or 10’ x 1500 sq. ft. rolls)


Please contact us to discuss!